to sew Red Riding Hood costume, you will need:
- white cotton fabric;
- finished skirt or cloth coal color to it;
- red cloth;
- black vinyl;
- set of eyelets from the punch;
- white lightning;
- red silk ribbon;
- red tape width of 25 mm;
- elastic band (rubber band),
tissue consumption will depend on the age and size of your Little Red Riding Hood.To decide on the meter, start with the production of a pattern - this will help you understand how much fabric you will need.
... picking flowers for grandma
|See. More: D etskie suits, sundresses|
LeafLittle Red Riding Hood costume for
1. Take an old newspaper or a sheet of paper and draw on it a bodice pattern (basic pattern of the use of any magazine or a circle the size of a T-shirt).
2. Cut out the white cloth items before 2 and 4 parts of the backrest (do not forget to leave allowance of 0.5 cm).Sew 2 of them bodice - you'll have a liner and the front of the blouse.For this Stitch shoulder and side seams.
Details back - details before
3. Fold detail bodice facing each other and sew along the edge of the neck.Nadsekite allowance.
4. Turn the bodice right side out and iron it.Sew the armholes and bottom of the product.
5. Now you need to make puffed sleeves.To do this, cut the fabric 2 "flap" the desired height.Treat overlogom edge or using a zigzag stitch, then pull back from the edge of 1.5 cm wide and sew zigzag narrow gum.The ends of the gum fix manually.
6. The sleeves are a little prisoberite, then Sew sleeve in the armhole of the bodice.Treat the edges of the fabric seam zigzag.
7. Assemble and sew the second sleeve.
8. It remains to draw back bodice.Fold the seam allowances and lining the facial details and Sew zipper.
9. To dress to look nice, and the lock does not open, you can sew the zipper just below and to the very top to set the hook.
skirt suit for
Skirt for Little Red Riding Hood costume, you can make your own hands, but it is much easier to use one.Argue belt, remove the skirt inside out and sew to the bottom edge of the bodice.
as the spectacular additions can be made fluffy skirt linings.It will come in handy for all festive girlish costumes more than once.This skirt is worn separately and sewn like a normal sun skirt with an elastic band.For it needs at least three layers of rigid mesh.Frills will add splendor.
1. Spread a red fabric and fold it in half.At the fold line put a plate with a diameter approximately equal to the circumference of the baby's neck.Measure the length of the fabric along the fold of the plate to the edge.
arrow shows the fold of tissue
2. Grab a plate of tape.Measure the length of tape cloak.Then connect the points obtained arc and cut the excess tissue.Do you get a blank for about 3/4 of the circumference of the cloak.A cup circle and also cut the excess.
3. Deal with the edge of his cloak, so they are not showered.
4. Now the same red cloth cut 4 parts for caps 2 for the front side and 2 for padding.Try to make the lower part of the same form and size to the neckline of his cloak.The approximate height of the details hat 11.5 cm and 10.5 cm width (at the widest point).Approximate figures, as head size in children may differ.Also, do not forget to take into account the seam allowance.
Total 4 parts: 2 to "face", 2 for padding
5. To build cap, take 2 parts, connect the right side facing and sew occipital joints.Then fold together the items received also face inward and sew.Neck, leave open.
6. Turn the product on the front side, smooth the seams and then sew at the bottom (of the neck).
7. Stitch the top coat so that one strand is stretched, and the second - free.Pull the loose thread and form uniform creases.The top coat in length must be the same with the bottom of the hood.Connect the parts with pins and sew so.
8. Red tape treat the cut seam.
9. In the same tapes made by Velcro or just sew long ribbons - they can be free to fix the bow.
10. Sew with Velcro to the top of blouses and to the back of the coat.Through Velcro suit will look more solid.
Vest Red Riding Hood
It's time to create the main highlight of Little Red Riding Hood Costume - vest leatherette (vinyl) with satin lacing.
1. From a piece of vinyl cut black vest simple form (with the base can be used to take earlier pattern blouses) - 2 parts.Then, in the middle of one side (this will be in front of the corset) cut vertical stripes.This is to ensure that between the sides of the corset was quite a large skylight and lacing looked impressive.
also be placed on the item before a deep cut.
2. Sew side and shoulder seams.Try vest to check whether he is sitting.If necessary, trim the excess.Process edge is not necessary.
3. It remains to punch holes with eyelets and thread the tape in them.English mark the location of the hinge pins.
4. Make a small puncture in places cruciate incisions, cut triangular "petals" with cuts to round holes.With a punch and hammer fasten eyelets (if you've never done this before, practice first on a scrap of vinyl - here need a little skill).
5. Lace Corset red ribbon from the top down, at the bottom of the bow tie.
Red Riding Hood costume for girls are ready!
|See. More: suit lamb with his hands|