to suit princess need:
blue stretch velvet - 1 m;
blue stretch velvet - 50 cm;
silver cloth - 30 cm;
decorative tape - 4 m;
velcro - 10 cm;
white satin - 1 m 50 cm;
blue satin - 2 m;
interlining - 20 cm;
wide elastic - 10 cm;
narrow elastic - 15 cm;
satin ribbon - 30 cm.
princess costume with their hands: User
1. Not to be mistaken with the size, take a jacket daughter and putting it on paper, make a pattern topdresses.
2. Attach the pattern to the blue velvet, folded in half, and cut bodice.Be sure to leave all sides on the allowances of 2 cm.
3. The back of the bodice princess costume consists of 2 parts.They should be identical to the forehand, only in the middle, give extra 2cm to issue clasp.And the cut-back should be slightly less deep.
4. On the wrong side of the silvery fabric, draw a trapezoid.Size about.Its upper part is to be equal to the width of the notch.Height - length forehand.The base is sli
5. stitched silver accents on the sewing machine.
6. Give neckline rounded shape.
7. Decorate the middle of a bodice Cinderella costume decorative braid.Please zigzag lay to one side.
8. Then, in the other direction.
9. And now trimmed with silver braid side of the insert.
10. Go to work with the items back.Fold the inner edge of the 2 times and Stitch.
11. Put 2 pieces back on the item before.Align the hips and shoulders (do not forget to buckle overlap).
12. Cut the Velcro into 4 equal pieces.On the left front side of the shelf 3 sew Velcro at regular intervals.On the wrong side of right front symmetrically sew the other side of the Velcro.
13. Align the parts, putting right sides together.Run the shoulder seams.
14. Sew the sides.
1. Copy the pattern on the paper sleeves.The base parts must be at least 12 cm. By increasing the slope washed over, you can make a lush sleeve.
2. From white satin sleeveless carve out two parts to the costume of Cinderella, as well as two identical rectangular size of 7.5 x 24 cm.
3. Fold the rectangle in half, right side out and iron.
4. Attach a hose to the untreated side of the rectangle.Evenly prisborivaya sleeves in the middle, baste details pins.
5. Stitch.Finish the edge zigzag.Do the same with the 2nd sleeve.
6. progladte items by tilting the cuff down.The result should match the image.
7. Fold the sleeve in half and do the inner seam.
8. Turn the bodice and sleeves of the details to the wrong side and connect them with pins.
9. Run the seams on a sewing machine.
10. Deal with zigzag edges.Trim the excess thread.
1. Leaf turn out to the right side.
2. From the blue velvet cut strip width of 3 cm and a length approximately equal to the circumference of the cutout.Fold in half.
3. Sew the tape to the front side of the cut.
4. Fold the ribbon inside and prostrochite so that the front side of the contour of the neck lay a neat line.
5. Parts of the tape extending beyond the edge of the neck, cut, bend and hem manually.
1. How can I make a suit of princess with their hands and leave him without the beautiful petals on the sides?White satin, cut a square of side 60 cm.
2. Give it the shape of a circle.
3. Fold the circle in half.Stitch on the rounded side, leaving a small opening.Through him remove the item on the front side.Carefully sew the hole.
4. On the side of the direct route the basting stitch at a distance of 0.5 cm from the edge.
5. Pull the string and prisborte tab.
6. Attach it to the side of the bodice so that half of the petal was front and half from behind.Pin the second tab.
7. stitched petals, finished edges.
1. From blue satin vykroyte 2 identical rectangle measuring 110 x 65 cm.
2. Sew the parts connecting the smaller side.Edge treat zigzag.
3. Along the top edge of the route the basting thread.Pull the end prisborte skirt folds distributed evenly.
4. Attach the skirt to the bodice Cinderella costume (face to the front side).Fasten parts pins.
5. Stitch seam and process zigzag.
6. Remove the dress to the right side.It is ready.
1. From blue satin make 2 equal parts.Measure the circumference of the baby's head.The length of each part should be 2/3 of the length of the head.In the middle of it should grow slightly.Another 2 parts of the same shape cut out of nonwoven.However, they should be slightly less.
2. With the help of iron and non-woven satin connect parts.
3. Cut the corners of the blue fabric.
4. Fold the parts together, combining satin side.Sostrochite leaving nezashitoy only one narrow side.
5. Remove the rim on the right hand side with a pencil.
6. Spread detail otutyuzhte.Sew the open end.
7. To sew the ends of the rim of gum.The rim is ready.
1. By measuring arm girl vykroyte 2 parts, flared up.Do not forget allowances.Gloves can be slightly larger than the handle.The lower part of the cut at an acute angle.
2. Carefully treat edge without stretching the fabric.
3. For acute corner sew a loop of elastic.
4. At the top of the hem using pins prodernite gum.Gently pull together to avoid the sting of the knob and secure the edges.
5. Bend part in half lengthwise and lay seam.Likewise, follow the 2nd part.Turn to the right side.Gloves are ready.
1. Measure the circumference of the baby's neck.Cut a piece of satin ribbon the same length plus 3 cm.
2. To both ends of the ribbon sew a piece of Velcro.It will serve as a clasp.
3. At the center of a necklace on the right side, attach the decorative ornament from tapes.
princess costume ready.You can go to the ball.
|More on the topic: sew Red Riding Hood costume|